When the joinery is the detail people actually touch, brush marks show. HVLP spraying in Hampshire gives a flat coat on doors, frames and cabinetry without removing them from the building.
Homeowners, interior designers and fit-out clients where the joinery is the visible detail.
HVLP guns deliver low-pressure, finely atomised coats suited to joinery, doors, cabinetry and detailed mouldings. Passes are thinner and slower than airless, which is precisely why the finish looks flat and even. Multiple light coats with intermediate denib produce a surface that brush application cannot match.
Yes — in-situ spraying is the normal approach. Doors are wedged, edges masked and the room contained so the coat lands flat and nothing else gets overspray.
Touch-dry within hours, careful use the next day, full hardness over the following days. On Hampshire jobs we hand over with a short care note so nobody scuffs a green film.
Only with proper keying and the right primer. We test adhesion on a hidden section first — if the existing coating is failing underneath, spraying over it just buys a short delay.
Less mess in the room, more setup. Containment and masking take the first part of the job; after that the coating stage is quick and contained.
We can match to a fan deck or a physical sample. A sprayed sample panel is signed off before the main work so the colour is agreed in the actual light of the room.
Yes — cabinetry is one of the most common fine-finish briefs we take on around Hampshire, often alongside doors and frames in the same visit.
Send photographs of the joinery in your Hampshire property and we will confirm whether spraying is the right call.
Fine-finish spraying suits Hampshire projects where the joinery is on show and the room can be handed over for a couple of days.
Speak to a Hampshire commercial decorating contractor that turns up, communicates clearly and delivers a finish that lasts.
