Homes and residential blocks

Decorating a loft conversion or dormer

A conversion is almost entirely new surfaces meeting old ones. The finish is judged at the junctions: where the new stair meets the old landing, and where the dormer cheek meets the existing roofline.

Loft conversions and dormers decorated by Dynamic Decorating in Hampshire

New board, new rules

Tape-and-joint plasterboard shows every imperfection under raking light from a rooflight. Even suction and good light during application are what stop joints flashing later.

  • Joints and beads checked before the first coat
  • Suction evened across board and skimmed areas
  • Work inspected under the room's own light, not a work lamp

Angles, reveals and rooflights

Sloping ceilings, deep rooflight reveals and eaves cupboards are all cutting-in work. Sprayed application often makes sense on the large sloped planes with brushwork at the detail.

Matching into the existing house

New paint next to twenty-year-old paint never matches, even in the same colour. Usually the honest answer is to carry the new scheme onto the existing landing so the transition happens at a natural break.

3 questions we get about this building type

When should decorators come in on a conversion?
After the plaster has dried and second fix is complete. Coming in too early means working twice.
Will the new work match the rest of the house?
Not exactly, and we will tell you that. Extending the scheme to the landing usually solves it far better than trying to blend mid-wall.
Do you spray sloped ceilings?
Where the room is clear, yes — it gives a very even finish across large sloped planes.

Next step

Tell us when second fix completes and we will book the decoration to follow it properly.

Get a quote

Other building types

Start your project

Planning a commercial painting or decorating project?

Speak to a Hampshire commercial decorating contractor that turns up, communicates clearly and delivers a finish that lasts.